Engine Oil Flush

Removes the oxidised oil deposits from the crank case.
Dissolves the carbon particles and sludge from the restricted oil passages.
Eliminates the wear caused by carbon deposits in the crank case.
Enhances the performance of the new engine oil and restores the peak performance of the engine.
Compatible for all grades of mineral and synthetic oils.

Directions of Use:
1. Add the Boult Engine Flush to the existing engine oil before the oil change.
2. Allow the engine to run at idle condition for 10-15 mins.
3. Remove the drain plug and drain the old engine oil in warm conditions.
4. Replace with new engine oil and oil filter.